HPYL-140 oil extractor
Introduction for HPYL-140 oil extractor
This model oil extractor is with the higher quality ,which is improved product based on many years’s experience of our factory and feed-backed information from the users.
The structure for oil extractor
The oil extractor consist of 5 parts including hopper,gearbox,press case,pressing screw,machine body.
Working principle for oil extractor
When oil extractor is operating,prepared material enters the chamber from the hopper and then moves forwards by the rotating pressing screw and is pressed.Under the high-pressure condition in the chamber,friction between material and screw,between material and chamber will be created,which also creates friction and relative movement among material particles.On the other hand,root diameter of the pressing screw varies larger from one end to the other.Hence,when rotating,it not only pushes particles moving forwards but turns them outwards as well.Meanwhile,particles adjacent the screw will rotate along with screw's rotating,causing every particle inside the chamber to posses different speed.Therefore,relative movement among particles creates heat which is necessary during manufacturing because of helping protein change property,damage colloid,increase plasticity,decrease oil's elasticity,resulting in high oil productivity.
Main feature for oil extractor
1. High oil yield(the rate of the outlet oil >93%),residual oil of the Cake is less,crude oil is clearer.
2.The oil expeller ’s material is better, the accssories are wear resistance and long service life after quenching conditioning treatment.
3.The gear-box's gears adopt the special helical & couping gear's design, with the lower load, less consumption and low noise
Suitable oil seeds for oil extractor
The oil extractor is suitable for Physical squeezing all kinds of vegetable oil material ,such as soybean, cottonseed ,peanut, rapeseed,sunflower, teaseed , coconut dry , gendarmerie seed and palm kernel etc.
Technical data of HPYL-140 oil extractor
Type:HPYL-140 oil extractor
Capacity: 12-13t/24hrs
Main power: 22kw
Dimension: 2050*700*1480mm
Weight:950kg
The other models oil extractor
Type | 6YL-80 | 100/95 | 105 | 120 | 130 | 160/165 | 180 |
Power (kw) | 5.5 | 7.5-11 | 7.5-11 | 11-15 | 15 | 18.5-30 | 22-30 |
Shaft speed (R/M) | 40-50 | 30-40 | 30-40 | 30-40 | 28-38 | 28-35 | 30-40 |
Size (m) | 1.32*0.54*1.02 | 1.64*0.64*1.2 | 1.87*0.64*1.2 | 1.75*0.64*1.31 | 1.93*0.68*1.48 | 2.2*0.85*1.56 | 2.35*1*1.76 |
Weight (kg) | 380 | 480 | 650 | 700 | 820 | 1200 | 1500 |
Belt | B type, Length 3.2-4m |
Capacity of kinds of type oil extractor
Item
Type | Rapeseed (t/24h) | Peanut (t/24h) | Soy (t/24h) | Sesame (t/24h) | Cottonseed (t/24h) | |||
Hot pressing | Cold pressing | Hot pressing | Cold pressing | Hot pressing | Cold pressing | Hot pressing | Cold pressing | |
6YL-80 | 1.9-2.4 |
| 1.9-2.4 |
| 1.8-2.3 |
| 1.9-2.4 | 0.9-1.2 |
100/95 | 3.5-4 | 1.8-2 | 3.5-4.5 | 1.5-2.5 | 3.3-3.8 | 1.7-2.5 | 3.5-4 | 2-2.5 |
105 | 4-7 | 1.8-3 | 4-7 | 1.8-2.5 | 3.5-6 | 1.8-3.5 | 5-8 | 3-5 |
120 | 7-8 | 2.4-3 | 5-7 | 2-3 | 6-7 | 2.5-3.5 | 7-8 | 3-3.5 |
130 | 8-10 | 5-6 | 8-10 | 4-6 | 9-10 | 4.5-5.5 | 9-11 | 6-8 |
160/165 | 14-20 | 13-18 | 15-20 | 10-15 | 14-18 | 10-15 | 15-20 | 11-15 |
180 | 16-22 | 15-18 | 18-22 | 12-18 | 16-19 | 12-18 | 17-22 | 13-16 |
Rate of output oil (%) | 30-38 | 28-35 | 35-45 | 32-40 | 10-16 | 8-14 | 44-47 | 10-14 |
Residue oil of cake (%) | 7.5-8 |
| 7 |
| 6.5-7 |
| 6.5-7.5 | 5.5-6.5 |
Attention for oil extractor
If you have to get high quality oil,you have to attention these steps as below:
1.have to remove the seeds shell first.
2.clean the seeds first.
3.like soybean,peanut,walnut,coconut etc,they have to be crushed or grinded into small sizes then pressing oil.
4.need to roaste the seeds first,because these process will decide the oil extract rate,it is the important step.
5.filter or refine the crude oil will be better.
Suitable oil seeds as below for HPYL-140 oil extractor
Machine pics for oil extractor
The spare parts for HPYL-140 oil extractor
Packing pics as below for oil extractor
Test Standard:
Our oil press strictly conforms to GB/T9793.1-19999 of the People’s Republic of China and has been ISO and BV certified.
Warranty Terms:
A. Free replacement of accessories in 6 months from the date of purchasing.
B. Free replacement of main body in 12 months from the date of purchasing
Payment:
30% deposit to run order by T/T, the balance be paid up before shipment. Or LC, western union, paypal are acceptable.
FAQ:
- Delivery time.
---20~30 days after order confirmation. We need time to prepare machine according to exporting standard, wear-in, making wooden box, fumigation and suitable ship arrangement from forwarder. - If I don't know how to operate this machine? how can I do?
----Our machine has been tested OK and fully assembled before shipping, customer just needs to make
2~4 hours wear-in and then can work. - What's wear-in for new machine?
---- use 10 KG oil cake + 1KG sand + 1KG water, mix them, put in oil press, wear in 3~4hs.
1st hour, adjust oil cake thickness as 3mm.
2nd hour, adjust oil cake thickness as 2.5mm.
3rd hour, adjust oil cake thickness as mm. - What are cold press and hot press?
----Cold press is pressing dry and raw seeds. Usually need to press 2 times to get maximum oil.
----Hot press is pressing roasted seeds. Usually only press 1 time to get maximum oil. peanuts roast
to 125~130 degree with 1~2% moisture. (We produce seeds roaster heated by economical fuel.)