High efficiency portable oil refinery
Product Description
1. Introduction of High efficiency portable oil refinery
Solvent condensation system combines with evaporation system closely, and evaporative condenser and steam stripping condenser all work under negative pressure.
Non-condensable gas enters the energy saver from the shell of the first evaporator. In energy saver, non condensable gas exchanges heat with condensate from the evaporative condenser.
Finally, the condensate temperature discharged from energy saver is increased, and the solvent separated water from going to the solvent holding tank.
The high temperature makes it unnecessary to be reheated for the recycling, so as to save energy. Non condensable gas from energy saver enters de solventizing condenser, in which a great deal of gas is condensed, and the tail gas is discharged into the final condenser.
The solvent gas from the extractor enters extraction condenser, and the non condensable tail gas enters the final condenser.
For the free gas in final condenser, diversion box, holding tank, underground solvent library and mis cella tank, cool them with low temperatured cold water to recycle most of solvent gas. The tail gas with little solvent goes to paraffin recovery process.
Capacity |
30-500T/D |
Residual oil in meal |
ÃÂâÃÂÃÂÃÂä 1% |
Solvent consumption |
ÃÂâÃÂÃÂÃÂä 2Kg/T (No.6 solvent oil) |
Crude oil moisture and volatile matter |
ÃÂâÃÂÃÂÃÂä 0.30% |
Power consumption |
ÃÂâÃÂÃÂÃÂä 15KWh/T |
Steam consumption |
ÃÂâÃÂÃÂÃÂä 280KG/T (0.8MPa) |
Finished meal moisture |
ÃÂâÃÂÃÂÃÂä 13% (adjustable) |
Residual solvent in finished meal |
ÃÂâÃÂÃÂÃÂä300PPM (qualified detonated experiment) |
2. Main parts of High efficiency portable oil refinery
(1) Solvent pumps: continuously spray solvent to the rotary-type extractor
(2).Roary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent(form miscella). After processing, you can get wet meal and miscella (mixed oil).
(3). DTDC: usd to separate the solvent from the wet meal.
(4). Miscella tank 1st: pump the miscella (oil with solvent) in to the miscella 1st , and then add 10% saline water to it. The phospholipid and impurities in the miscella will react with the saline wter, at last the reactant precipitate, reaching the goal of purifying.
(5). Miscella tank 2nd: the purified miscella will be pumped into it.
(6). Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.
(7). condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.
Packaging & Shipping
Package: Wooden case or plain packaging for High efficiency portable oil refinery.
Shipment: By sea, 20GP, 40HQ or 45HQ for High efficiency portable oil refinery.
Company InformationOur Services
Pre-sale
System evaluation: 1. Project basic situaction
Solution: 1. The investment budget 2. Site measurement 3. Technical discussion
Product selection: 1.Factory inspection 2. Site measurement 3. Technical discussion 4. Supply professional drawing and lists
Win-win cooperation: 1. Sign the contract 2. Wstablish mutual benefit, strategic cooperative partnership.
In-sale
Design evaluation: 1. Detailed technical assessment, arrangement 2. Design of process and equipment layout
Procurement: Strictly inspection, optimized selection.
Installation: 1. Quality and quantity guaranteed 2. Completion of hand over
Acceptance: 1. Acceptance test 2. Accepted deliverables
Technical traning: 1.On-site installation and products training 2. Operation skills training 3.Maintenance training 4. Centralized technical training
After-sale
Technical service: Long time technical service
Accessories supplying: Supplying spare parts with cost
Complaint handling: 12-24 hours response mechanism
Client Review: 1. Call-back 2. Regular return visit.
Contact with us